您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE J2119 Manual Controls for Mature Drivers

作者:标准资料网 时间:2024-05-18 23:19:30  浏览:8663   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J2119
Title:Manual Controls for Mature Drivers
Issuing Committee:Mature Driver Standards Committee
Scope:Since little data exists to provide appropriate values for control parameters that would be appropriate for mature drivers, the following recommendations are of a general nature. However, they are based upon the current understanding of the aging processes that characterize mature drivers. Notwithstanding the lack of an extensive amount of data in this field, the dissemination of this SAE Information Report is considered to be appropriate and timely in light of the large increase in the number of mature drivers on the public roads, and because of the need to at least initiate efforts toward developing an information report covering this issue.It is realized that there may be cases where specific recommendations may conflict with vehicle packaging and/or operational requirements. Deviation from the recommendations may be necessary and permissible to achieve the best overall system performance. A "mature" driver is defined as one who is over the age of 50 since visual changes become noticeable at about this age. Degenerative cognitive and skeletal changes visually become more apparent at a later age.
下载地址: 点击此处下载
【英文标准名称】:Specificationformanufactureofverticalsteelweldednon-refrigeratedstoragetankswithbutt-weldedshellsforthepetroleumindustry
【原文标准名称】:石油工业用对接焊壳体的立式钢焊接的非冷却贮藏罐的制造规范
【标准号】:BS2654-1989
【标准状态】:作废
【国别】:英国
【发布日期】:1989-09-29
【实施或试行日期】:1989-09-29
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:加筋;容器;圆柱形;楼梯;基础;通风;流体设备元件;检验;负荷;屋顶;对接接头;结构设计;尺寸;设计;化学成分;钢;储油槽;直径;漏泄试验;试验条件;放射性试验;验收(鉴定);壳体结构;支撑物;尺寸公差;水箱;石油技术;过道(建筑物);焊接接头;风荷载;冲击强度;门;包盖压力容器;封盖物;抗震设计;镶面(建筑物);隔热;厚度;垂直;人孔;锚具;热处理;压力容器;焊接;扶手;基座;静压容器;流量喷咀;大梁;散货储藏容器;燃料仓库
【英文主题词】:dimensions;fuelstorage;petroleumtechnology;bulkstoragecontainers;roofs;loading;chemicalcomposition;thickness;cladpressurevessels;earthquake-resistantdesign;seatings;anchorages;hand-rails;inspection;steels;ventilation;reinforcement;testingconditions;diameter;dimensionaltolerances;manholes;structuraldesign;containers;design;vertical;weldedjoints;staticpressurevessels;foundations;radiographictesting;doors;cladding(buildings);leaktests;supports;welding;buttjoints;shellstructures;heattreatment;thermalinsulation;windloading;covers;tanks(containers);fluidequipmentcomponents;acceptance(approval);impactstrength;sumps;gangways(buildings);stairs;flownozzles;pressurevessels;cylindricalshape;girders
【摘要】:
【中国标准分类号】:E98
【国际标准分类号】:75_200;23_020_30
【页数】:94P.;A4
【正文语种】:英语


基本信息
标准名称:煤矿瓦斯抽采工程设计规范(附条文说明)
英文名称:Code for design of the gas drainage engineering of coal mine
中标分类: 工程建设 >> 原材料工业及通信、广播工程 >> 矿山、煤炭工程
ICS分类:
发布日期:2008-12-15
实施日期:2009-06-01
首发日期:
作废日期:
起草单位:中煤国际工程集团重庆设计研究院
出版社:中国计划出版社
出版日期:2009-06-01
页数:47
适用范围

为适应科学技术的发展,保证我国煤矿瓦斯抽采事业健康发展,提高瓦斯抽采设计技术,制定本规范。
本规范适用于新建、扩建、改建及生产煤矿的瓦斯抽采工程设计。

前言

没有内容

目录

1 总则 2 术语 3 建立矿井瓦斯抽采系统的条件及抽采系统选择 3.1 建立矿井瓦斯抽采系统的条件 3.2 抽采系统选择 4 瓦斯抽采设计参数 5 瓦斯抽采方法 5.1 一般规定 5.2 瓦斯抽采方法选择 5.3 专用瓦斯抽采巷道 5.4 钻场及钻孔布置 5.5 封孔 5.6 地面钻孔 6 抽采管路系统选择、计算及抽采设备选型 6.1 抽采管路系统选择的原则 6.2 抽采管路管径、壁厚计算及管材选择 6.3 管路阻力计算 6.4 管路布置及敷设 6.5 抽采附属装置及设施 6.6 抽采设备选型 7 瓦斯抽采泵站 7.1 地面固定瓦斯抽采泵站 7.2 井下固定瓦斯抽采泵站 7.3 井下移动瓦斯抽采泵站 8 安全与监控 8.1 安全设施及措施 8.2 矿井瓦斯抽采监测监控系统 附录A 煤层瓦斯抽采难易程度分类 本规范用词说明 附:条文说明

引用标准

没有内容

所属分类: 工程建设 原材料工业及通信 广播工程 矿山 煤炭工程